The working principles of automatic chamfering machine mainly include the following:

-Rotation by friction: the main transmission mechanism consists of a driving wheel shaft and an idler wheel shaft, and the driving wheel shaft and the idler wheel shaft are respectively inlaid with sets of styrene-butadiene rubber wheels. The double head is placed between them, and when the driving wheel rotates, the double head will rotate with the help of friction with the rubber wheel.

-Driven by belt pulley: The working principle of automatic double-headed chamfering machine is that the belt pulley drives the motor, the air pressure pushes the feed forward and backward, and the cam advances and backward. So as to realize the transverse feed on the high-speed rotating cutter head, and thus realize the new concept that the circular tube and the round bar are clamped immovably and the cutter head rotates to cut.

-Loading and fixing through the wave cone: Through the wave-shaped loading equipment, the wave cone is used to prevent the product from rotating at variable speed on the workbench. The arm press table has played a significant role in fixing products.

-The product does not rotate with the cutter head: the principle of automatic servo double-head chamfering machine is the processing principle that the product does not rotate with two cutter heads. When the center of the product is adjusted to be the same as the center of the rotation of the cutter heads on both sides, after the cutter heads on both sides of the product are clamped and rotated, the internal angle, the external angle and the plane can be processed simultaneously through the rotary feed of the servo motor.