The working principle of automatic stamping die for support is as follows:1, servo feeder automatic feeding, matching servo punch, the whole process down, but also pieces of material in, finished products out.2. The whole set of die technology integrates two single-project die processes, namely, the first process, blanking, punching, hole turning, and the second process. At the same time, the die is punched at the same time during bending, with a special process of forming and bending for 90 degrees, nitrogen spring pressing, and the servo motor is used to drive the linear module to push the material sheet of the first process to the positioning position of the second process. The complete set of stamping process is skillfully combined with the numerical control system, and the die is equipped with a separate program control box.3. This ingenious structure directly eliminates the old technology and improves the production efficiency by more than 5 times....